Ford AODE, 4R70E, 4R70W, 4R75E, 4R75W New As-Cast Aluminum Low Profile
Transmission Pan. THIS PAN WILL NOT FIT AOD or FIOD!!!!!! Volume:
Stock capacity for AODE, 4R70, 4R75 Dimensions:
See Picture Gallery for dimensions. Number of Bolts
: 14
On applications where the exhaust is routed close to the passenger
side of the trans pan (Mustang and some others), please check to be
sure there is room for the drain plug boss. The drain plug is on the
passenger side of the pan, and it’s boss sticks out almost as far as the
gasket flange.
A Ford reusable gasket should not be used with this pan. An
aftermarket flat gasket is recommended and is available from us.
Filter requirements for this pan:
AODE, 4R70, 4R75 – must use 2WD AODE filter. 4WD AODE and all 4R70 filters will not fit.
Transmission Pan Features Increased oil capacity for cooler temperatures
Sand-cast aluminum with raised fins
3/16-inch thick wall construction to add strength to the transmission case
3/8-inch thick gasket flange will not bend when bolts are tightened
Machined gasket surface for a secure seal
Boss cast into pan can be machined for a temperature sensor
Magnetic drain plug for easier, less messy maintenance
Mounting hardware provided
Gasket and filter not included (use stock parts).
What is the difference between AOD and AODE, 4R70, 4R75 Transmissions?
The transmission pan bolt pattern for the AOD is slightly
different than that of the AODE, 4R70, 4R75. It is important that you
identify which transmission you have so that the pan you order will have
the correct bolt pattern.
The AOD transmission was used in many rear wheel drive Ford
vehicles from late 1981 through early 1993. The AODE transmission was
produced for model years 1993 and 1994. Production of the 4R70 also
began in 1993 and by 1995 it replaced the AODE. The 4R75 designation
began in 2003.
AODE, 4R70, and 4R75 transmissions have a large electrical
connector on the passenger side of the transmission just above the
transmission pan. They also have a neutral safety switch mounted on the
selector shaft on the outside of the transmission case on the driver’s
side just above the transmission pan.
AOD transmissions have an internal neutral safety switch. A
cable connects the throttle body to the transmission to downshift the
transmission on full throttle acceleration. The AODE, 4R70, 4R75 do this
electronically. Remember:
To order the proper pan to get the correct bolt pattern on your pan.
Filters for PML AOD, AODE, 4R70, 4R75 Transmission Pans
PML makes deep and low profile transmission pans for Ford AOD,
AODE, 4R70, and 4R75 transmissions. You must get the correct filter for
the pan you order. For the low profile pan: AOD
– must use 2WD AOD filter. 4WD filter will not fit! AODE, 4R70, 4R75
– must use 2WD AODE filter. 4WD AODE and all 4R70 filters will not fit! Gasket and filter not included (use stock parts). We do sell the service kit and can add to the order at additional cost. DUE
TO THE HIGH DEMAND OF THESE PANS THERE MAY BE A ONE TO THREE WEEK BACK
ORDER, SO PLEASE CALL OR EMAIL PRIOR TO YOUR PURCHASE TO CHECK STOCK.
THANK YOU!!! PLEASE MAKE SURE OF YOUR TRANSMISSION PRIOR TO ORDERING YOUR ITEM. CT POWERTRAIN PRODUCTS PART NUMBER: 76-AOD-840 A -LOW Store Policies Payment terms: All credit card purchases either called in
or done online will have to clear before we will ship product. PayPal
payments made with instant transfer with either PayPal funds or a credit
card linked though PayPal will ship the same or next Business day.
PayPal payments made with the PayPal E-Check feature will ship only once
PayPal clears payment. Return policy details: Item(s) must be returned
within: 30 DAYS Refund will be given as: Money Back to funding source or
if paid by check or cash, refund will be a Company Check mailed to
customer after processing of refund takes place. ALL RETURNS MUST BE
MADE WITHIN 30 DAYS AND MUST BE RETURNED TO US IN RE-SELL ABLE CONDITION
AND THE ORIGINAL PACKAGING MUST BE UNOPENED. ALL RETURNS MUST HAVE A
COPY OR ORIGINAL OF OUR STORE INVOICE THAT CAME WITH SHIPMENT OF
PRODUCT. WE DO NOT REFUND SHIPPING CHARGES TO OR FROM SELLER. International Ordering Guidelines: International Taxes and Tariffs: Our
prices do not include taxes and tariffs. Customers outside of the United
States may be required to pay these fees to the courier, as applicable,
upon delivery. For example , Canadian customers will be assessed the 7%
GST (Goods and Services Tax) or the appropriate HST (Harmonized Sales
Tax) or PST (Provincial Sales Tax) when the order arrives. Please
consult your local customs office or tax authority for information
specific to your situation. Duties and Taxes: Duties and taxes are the
responsibility of the person receiving the shipment and will be due at
the time of delivery. Please take this into consideration when ordering,
as the amount will vary by country and CT POWERTRAIN PRODUCTS does not
have access to these amounts. * Our prices do not include taxes, tariffs
or additional fees assessed by your customs broker. We cannot mark an
item as "gift" or "return" to avoid customs fees. This is illegal in the
USA and a Federal offense and we do not break this Policy/Law, EVER. If
you are outside the U.S. and you would like a shipping quote, E-mail
your physical address and we will provide a quote within 24 hours (M-F). Liability Waiver: WE WILL NOT REFUND OR PAY SHIPPING CHARGES ON
RETURNS. WE WILL NOT BE HELD LIABLE FOR LABOR, RENTAL CAR OR INJURY. ALL
CONTENT, NAMES, IMAGES, PICTURES ARE PROPERTY OF CT POWERTRAIN PRODUCTS
AND CANNOT BE USED WITHOUT OUR CONSENT IN WRITING. WE MAY OPTED TO DROP SHIP DIRECT TO SAVE TIME USING UPS GROUND AT OUR DISCRETION EVEN THOU THE POSTED SHIPPING METHOD MAY BE DIFFERENT.
Returns Accepted for this item if it's within 30 Days