Osmo Polyx- Oil

Osmo Polyx-Oil - 3031 Clear Matte
Please note: Only the 2.5L size is unable to be shipped to the following states – California, DC, Maine, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, Pennsylvania, or Virginia. Shipping addresses in these states will receive an error in the checkout. Please purchase the .75L or .125L size. At this time, none of the sizes are able to be shipped to the following counties in California - Los Angeles, Orange, Riverside, and San Bernardino. OUR EASIEST APPLICATION YET - Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again. Directions: Apply two thin coats with non-abrasive white scotchbrite pads Stir the Polyx®-Oil well and pour into tray Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks Ensure all excess product is removed from surface Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying Apply second coat following previous steps. Coverage: 0.125L = 24 square feet 0.75L = 140 square feet 2.5L = 480 square feet Please note: Only the 2.5L size is unable to be shipped to the following states – California, DC, Maine, Massachusetts, Michigan, Minnesota, New Hampshire, New Jersey, Pennsylvania, or Virginia. Shipping addresses in these states will receive an error in the checkout. Please purchase the .75L or .125L size. At this time, none of the sizes are able to be shipped to the following counties in California - Los Angeles, Orange, Riverside, and San Bernardino. OUR EASIEST APPLICATION YET - Osmo Polyx-Oil is a general purpose Hardwax-Oil wood finish that is derived from natural vegetable oils and waxes. Resistant to water, dirt, beer, wine, cola and saliva, Osmo Polyx-Oil is microporous and molecularly bonds with the wood, meaning it does not crack, flake, peel or blister. Our new advanced formula of Polyx-Oil has been specially engineered in Germany to be the first Hardwax-Oil available on the North American market that can be easily applied with a brush or roller, with no buffing necessary! Can be spot-repaired and/or restored/renewed with no sanding required, therefore wood never needs complete sanding and refinishing again.
Directions:
Apply two thin coats with non-abrasive white scotchbrite pads

Stir the Polyx®-Oil well and pour into tray

Work the product into the wood thinly and evenly in figure 8 or circular motions using a white pad

Be sure to thinly and evenly coat the surface and leave on the surface for approx. 5 minutes

With a clean white pad, polish the surface ensuring no swirl marks, rings, or wipe marks

Ensure all excess product is removed from surface

Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying

Apply second coat following previous steps.

Coverage: 0.125L = 24 square feet 0.75L = 140 square feet 2.5L = 480 square feet eBay integration
by