No Spill Threaded Oil

Makes oil changes even easier and faster:
-Threads in so it can't flop around while pouring!
-Vented for max flow rate - dump oil in as fast as you can!
-Anti-splashback design!
-High strength neodymium magnet integrated for storage on any steel surface with no mess!
-Lip holds oil jug to allow it to sit and fully drain after pouring!
"Fit perfect"
"Guys at the shop loved it.  The fact that it is magnetic was the driving factor for the purchase.  Nothing like wind blowing over your [standard plain jane] funnel as 6 qts of oil are being poured"
"It worked great for the ___ I used it on"
"The air vent straw works great"
Threads right into the oil cap opening in your valve cover, fits Toyota/Lexus/Scion with threaded cap listed below. (Tested on a 2009 Matrix)
Based on a Gates #31285 oil fill cap, you can search and verify fitment here:
https://www.partsplus.com/catalog-2/itemdetail/gates/31285
Fits over 727 vehicles, this is a limited interchange from Gates: LEXUS CT200H 2011-2017 LEXUS ES300H 2013-2022 LEXUS ES350 2007-2022 LEXUS GS200T 2016-2017 LEXUS GS300 2006 LEXUS GS350 2007-2020 LEXUS GS450H 2007-2018 LEXUS GS460 2008-2010 LEXUS GX460 2010-2020 LEXUS HS250H 2010-2012 LEXUS IS200T 2016-2017 LEXUS IS250 2007-2015 LEXUS IS300 2016-2021 LEXUS IS350 2006-2020 LEXUS LC500 2018-2021 LEXUS LS460 2007-2017 LEXUS LS500 2018-2020 LEXUS LS600H 2008-2016 LEXUS LX570 2008-2021 LEXUS NX200T 2015-2017 LEXUS NX300 2018-2020 LEXUS NX300H 2015-2020 LEXUS RC F 2017-2018 LEXUS RC200T 2016-2017 LEXUS RC300 2018-2019 LEXUS RC350 2019-2020 LEXUS RX350 2007-2020 LEXUS RX450H 2010-2020 LEXUS SC430 2010 LEXUS UX200 2019-2022 LEXUS UX250H 2019-2021 PONTIAC VIBE 2006 SCION IM 2016 SCION IQ 2012-2015 SCION TC 2005-2016 SCION XA 2005-2006 SCION XB 2005-2015 SCION XD 2008-2014 TOYOTA 4RUNNER 2004-2022 TOYOTA AVALON 2005-2022 TOYOTA C-HR 2018-2020 TOYOTA CAMRY 2002-2022 TOYOTA COROLLA 2003-2021 TOYOTA COROLLA IM 2017-2018 TOYOTA ECHO 2000-2005 TOYOTA FJ CRUISER 2007-2014 TOYOTA HIGHLANDER 2001-2022 TOYOTA HILUX 2005-2020 TOYOTA LAND CRUISER 2008-2020 TOYOTA MATRIX 2003-2014 TOYOTA MR2 SPYDER 2002-2005 TOYOTA PRIUS 2005-2019 TOYOTA PRIUS C 2012-2018 TOYOTA PRIUS PLUG-IN 2014-2015 TOYOTA PRIUS V 2012-2018 TOYOTA RAV4 2005-2021 TOYOTA RAV4 PRIME 2021 TOYOTA SEQUOIA 2008-2021 TOYOTA SIENNA 2007-2022 TOYOTA SOLARA 2002-2008 TOYOTA TACOMA 2005-2020 TOYOTA TUNDRA 2005-2021 TOYOTA VENZA 2009-2021 TOYOTA YARIS 2006-2011
Designed and 3d printed in Ohio, of PLA plastic. Color may vary depending on material availability- message me if this is important to you **Note: Printed from thermoplastic, so avoid high temperatures. A warm engine is fine, but if the engine is hot we recommend allowing it to cool enough that you can touch it (around 115 deg F).