Motor Oil

GT-1 ® High Performance Motor Oil with LiquiTek ® Kendall ® GT-1 High Performance Motor Oil with LiquiTek is a high quality, part- synthetic automotive engine oil designed to provide excellent engine protection for both turbocharged gasoline direct injection, conventional gasoline-fueled and flex-fueled passenger cars and light trucks under all operating conditions. GT-1 High Performance Motor Oil with LiquiTek is formulated with a blend of synthetic and conventional base stocks and and an exclusive performance additive package. The part-synthetic formulation provides increased oxidation resistance and thermal stability at high temperatures and better pumpability at low temperatures compared with conventional engine oils, for extra protection under all driving conditions. Our LiquiTek additive package provides increased engine protection by providing increased engine cleanliness and reduced wear. Reduced friction also helps improve fuel economy performance beyond ILSAC GF-6 requirements. GT-1 High Performance Motor Oil with LiquiTek (except SAE 10W-40 and SAE 20W-50) exceeds new car warranty requirements as defined by ILSAC GF-6A. It is uniquely formulated to help combat low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines. GT-1 High Performance Motor Oil with LiquiTek meets or exceeds “Resource Conserving” requirements for fuel economy improvement, emission system and turbocharger protection, and protection of engines operating on ethanol-containing fuels up to E85. It is backward serviceable for use where API SN or earlier “S” category engine oils are recommended. Applications • Turbocharged gasoline direct-injection, conventional gasoline-fueled and flex-fuel passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions • Four-stroke cycle gasoline engines in other mobile or stationary equipment GT-1 High Performance Motor Oil with LiquiTek is licensed for: • ILSAC GF-6A (except SAE 10W-40 and 20W- 50) • API Service SP, SN PLUS with Resource Conserving (except SAE 10W-40 and SAE 20W-50 which are API SP, SN PLUS only) GT-1 High Performance Motor Oil with LiquiTek meets or exceeds the requirements of: • Chrysler MS- 6395 • Ford WSS-M2C960-A1 (SAE 5W- 20) • Ford WSS-M2C961-A1 (SAE 5W- 30) • Ford WSS-M2C962-A1 (SAE 0W- 20) • GM6094M (obsolete specification) Premium Synthetic Blend Passenger Car Engine Oil; Formulated with LiquiTek Features/Benefits • Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct- injection engines (TGDI) • Meets ILSAC GF-6A requirements for new cars under warranty (except SAE 10W-40 & 20W-50) • Part-synthetic formulation provides enhanced protection against deposit formation and oil thickening, compared with conventional engine oils • Protects against rust and bearing corrosion • Low volatility for reduced oil consumption • Excellent low-temperature pumpability for protection during cold starts • Highly resistant to foaming • Helps maximize engine performance and minimize exhaust smoke • Formulated to protect turbochargers and emissions control system catalysts • Formulated for use in vehicles operating on ethanol-containing fuels up to E85 GT-1 ® High Performance Motor Oil with LiquiTek ® Typical Properties SAE Grade 0W- 20 5W- 20 5W- 30 10W- 30 10W- 40 20W- 50 Specific Gravity @ 60°F 0.848 0.862 0.862 0.866 0.869 0.881 Density, lbs/gal @ 60°F 7.07 7.19 7.19 7.21 7.25 7.35 Color, ASTM D1500 3.0 3.0 3.0 3.0 3.0 3.5 Flash Point (COC), °C (°F) 218 (424) 218 (424) 216 (421) 229 (444) 227 (440) 230 (446) Pour Point, °C (°F) -34 (- 29) -30 (- 22) -30 (- 22) -30 (- 22) -30 (- 22) -30 (- 22) Viscosity, Kinematic cSt @ 40°C 46.0 51.3 68.0 65.1 112 181 cSt @ 100°C 8.8 8.8 11.2 10.4 16.0 19.2 Viscosity Index 174 152 159 148 153 127 Cold Cranking Viscosity, cP 5,600 5,600 6,000 4,900 6,100 7,500 @ (°C) (-35) (-30) (-30) (- 25) (-25) (- 15) High-Temp/High-Shear Viscosity, cP @ 150°C 2.6 2.6 3.1 3.0 4.1 4.9 Sulfated Ash, ASTM D874, wt % 0.8 0.8 0.8 0.8 0.8 0.8 Total Base Number (TBN), ASTM D2896 7.0 7.0 7.0 7.0 7.0 7.0 Phosphorus, wt % 0.077 0.077 0.077 0.077 0.077 0.077 Zinc, wt % 0.085 0.085 0.085 0.085 0.085 0.085 Health & Safety Information For recommendations on safe handling and use of this product, please refer to the Safety Data Sheet via http://www.phillips66.com/SDS .

Returns Accepted for this item if it's within 30 Days