#j4nb-a1000g Complete Shenandoah Waste Oil

this listing is for one of the industry famous [J - PUMP] Completely reconditioned Shenandoah J pump assembly 90 day warranty see below see below This is a complete Shenandoah J Pump Assembly for a Waste Oil Heater. It is in good condition. We have tested it rigorously; we test all our pumps with thin diesel fuel, not heavy motor oil; they are pressure and vacuum tested to make sure they pass inspection; the output pressure is tested to make sure it's 40 psi and must have a good flow; we also pressure and vacuum test the shaft seal and run the pump with the inlet side closed off to make sure it will pull down to a minimum of 20 inches of vacuum; many used pumps in the industry do not pass this test at all; we've tested lots of pumps--we know. Only good quality pumps pass this test. We also check to make sure they run quietly. We also oil the pump motor bushings and check the drive coupling to be sure everything is correct and tight. The famous J pump head (pump head part #J4nba1000g) is bolted on the end of the cast iron bracket assembly, as shown in the pictures. These are miscellaneous used take-off pumps from waste oil heaters. All of them have 1725 RPM American-made motors, drive couplings, and cast iron bracket assemblies to hold motor and J pump together, and have the J pump part #J4nba1000g for the pump. They are a 1-piece assembly and may have different brand motors than some of them shown in pictures. Somebody may have replaced the motor sometime in the past. Paint and decals may vary. Please understand we sell lots of these and don't have time to take a picture of every last pump. If it really makes any difference to you, you may ask us what brand motor you are getting; and we will check what brands of motors are on the pump assemblies that we have presently in stock. All are 110 volt and are in good used condition. To save you the hassle, we also make sure they have the face seal, not the old-style lip seal on the pump shaft. The pictures below show some examples. The one you receive may differ slightly from the one pictured above in the header image or in the quad-pictures below. Note: Do not use this pressure pump in place of the meter pump style systems. All J pumps need to be used with a pressure regulator. If you have any questions, contact us with your furnace model, & we can list the proper pump for you. NOTE: Our Buy It Now price is for ONE pump assembly, not 4 pump assemblies. NOTE: This pump has cast iron center bracket (Shenandoah). If you have a different brand, this one should work, but we also list other brands of J pump assemblies. Most are interchangeable. If you're looking for the one with the aluminum center bracket, check our other listings.  [ Clean Burn J Waste oil pump assembly For Heater Furnace ] we also have lenz filters filters avail just include in your search above Track Page Views With Auctiva's FREE Counter

Returns Accepted for this item if it's within 14 Days