High Performance Bearing Synthetic Oil

.50oz of TSI 321 Synthetic Oil Wide Temperature Range .95 degrees F to +450 degrees F Non Flammable | Prevents Corrosion | Will not attract dirt, dust or lint Non staining. Withstands high pressure. Frees rusted or frozen parts. Dissolves grease and rust. Will not cake and gum. Reduces friction, protects metal and wood. Prevents seizure. Not electrically conductive. Works better because it forms a thin film which is absorbed by metal. Recommended for applications such as: Precision mechanism, bearings, power machines, rusty parts, industrial equipment, automotive applications, cutting, gears, electrical motors, air tools, mod release, firearms, fishing tackle, camera shutter, and many other uses. 32I was developed for use by N.A.S.A. in the Apollo Program. 32I is unique because of the extreme temperature range in which it operates as well as its ability to bond with the metal creating a thin film of lubrication without a greasy buildup. 32I is non-electrolytic. It will prevent metal corrosion and is not harmful to most plastics* or high alloy metals. Its unique properties have created a number of unusual applications for it such as camera lubrication and photograph polishing. TSI 321 does not contain a solvent and is highly recommended for use where most plastics* are present. *TSI321 is compatible with all plastics except PMMA (polymethyl methacrylate) and PVB (poly-vinyl butyral). If in doubt test before use. Specifications Appearance Gold Translucent Fluid Viscosity 460 cps (-20° C) 22 cps (23° C) 4 cps (100° C) Density 7.61 lbs per gal (22° C) Specific Gravity 0.912 (Room Temperature) Freezing Point Below -112° F Boiling Point Above 420° F Fire Point 510° F COC Flash Point 440° F COC Acid Ph (Water Extractable Acids) Ph 7.15 Specific Gravity at 60/60° F 0.9210 H 2 0 (SAD) 0.05% Carbon (Conradson) 0.48 Ash 0.32 Viscosity     0°F 323.7 CS 100°F 13.77 210°F 3.67 CS Viscosity Index 178.3 Sulphur 0.050% Chloride 0.058% Radiation Tolerance 2x10 11 rad exposure to Gamma irradation or electron beam over forty years Plastic compatibility *TSI321 is compatible with all plastics except PMMA (polymethyl methacrylate) and PVB (poly-vinyl butyral). Container : Comes in 15 or 30 ml Clear PET cylinder round bottle marked with resin identification code of 1. PET is of the polyester family and has high clarity, good chemical resistance, high impact resistance, and medium rigidity. PET is also light weight. The dropper tip is uncontrolled and dispenses product in a stream. And, comes with child resistant cap equipped with locking mechanism that requires additional effort to open. To be designated as “child-resistant” these caps have undergone the requisite evaluations of a regulatory agency. Lid is made with polypropylene (PP). DANGER: May be harmful in contact with skin. May be fatal if swallowed and enters airways. Response: IF SWALLOWED: immediately call a POISON CENTER or doctor/physician. Do not induce vomiting. Storage: Store locked up. Disposal: Dispose of contents/container to an approved waste disposal plant. Other hazards: Harmful to aquatic life with long lasting effects. For industrial use only. Keep out of reach of children. Not for household use.   See safety data (SDS) attached in image.

Returns Accepted for this item if it's within 30 Days