Engine Oil

Engine Oil Cooler Adapter Kit for GM LS LS1 LS2 LS3 LS6 LS7 LS9 2005-19 Corvette 1.Application – Works on Corvette C5 1997-2004, Corvettes C6 2005-2013, Corvettes C7 2014-2019, Cadillac CTS-V 2004-2006, LS1 Camaro & Firebird 1998-2002, 4.8L, 5.3L, 6.0L & 6.2L GM CK 1999-2007 trucks. This Oil Cooler Adapter Kit is for GM LS1 / LS2 / LS3 / LS6 / LS7 / LS9 Gen IV Engines. (Attention: Do NOT fit 2004-2006 Pontiac GTO) 2.Function – Specifically designed to reduce oil pressure drop over other designs on the market, retaining the factory oil filter location. The gasket and bolts are included for installation. 3.Design – The adapter features -10 fitting for the oil inlet/outlets along with a port for the oil temperature sensor and oil feed line. Oil exiting the adapter is filtered oil. Oil feed port for accessories is oil returning from the cooler. 4.Superior Quality – Made of premium impact resistance 6061 aluminum, finally anodized with black hard finish, durability and anti corrosion for lasting service time. 5.Satisfaction Guarantee – If you're not satisfied with the kit, simply return it for a full refund in 60 days or get a replacement during 1 year warranty via our customer service. Feature: This oil cooler adapter kit is the slick way to add an oil cooler for GM LS or Gen-V LT engine. There are 10 fitting for the oil inlet/outlets as well as a port for the oil temperature sensor and oil feed line. The oil exiting the adapter is filtered oil and the oil feed port for accessories is oil returning from the cooler. The mounting holes are counter-bored so the mounting bolts fit flush with the adapter surface for maximum clearance with a reliable seal. Bolt-on in place of the factory oil bypass cover, just above the oil filter. Low-profile design provides more header clearance than any other oil cooler adapter on the market. Two 1/8" NPT ports for sensors or turbo oil supply line. Ideal for Engine Swaps & High Heat Applications. Note: The oil cooler adapter is after the factory pan mounted oil filter in the production oil circuit so oil going out to the oil cooler is filtered oil. This oil cooler adapter is designed to be used with an external oil cooler. If you are not using an external oil cooler LPE offers an adapter block kit with oil supply and sensor fittings that does not have the external oil cooler lines (LPE part#L300015297). Installation Instructions: Clean the block mounting surface area and then install the supplied gasket and oil cooler adapter block. Install the oil cooler adapter bolts and tighten the bolts. Use thread sealing compound on the sensor or sensor plug threads along with the adapter block bolt threads. If you are using this adapter on a vehicle that doesn’t have an oil temperature sensor or has the sensor mounted elsewhere, then you should plug the oil temperature sensor port with the supplied M12 plug and crush washer. If you are not using this adapter to supply oil to a turbocharger, supercharger or other application then you should plug the 1/8” NPT port with the supplied fitting. The oil temperature sensor port plug can be used to add an oil temperature sensor to vehicles that don’t already have an oil temperature sensor and gauge. The temperature reading at this location will be the engine out (pre-oil cooler) temperature. Warning: You can’t plug the -10 oil lines on this adapter and run the engine. This adapter does not have an internal bypass passage inside of it. You must connect the -10 lines to an oil cooler or loop the lines back to the other port on the adapter or your engine will not have proper oil pressure and will be damaged. Package Includes: -10 fitting for inlet/outlets Gasket Adapter Bolts 1. Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. 2. All of the items are shipped from our Warehouse in USA . 1.  Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 60 days after the date of package arrived. No Claim will be accept after 60 days. 2.   Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee. If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us. About Feedback: Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. If possible,please leave us a positive feedback and 5 star DSR when you receive the item in satisfactory condition. Your kind support will be highly appreciated by us and keep us moving forward!

Returns Accepted for this item if it's within 60 Days