Ancel Br2000 Car Gearbox Brake Fluid Bleeder Vaccum Oil

ANCEL BR2000 Car Auto Vacuum Brake Bleeder Tank Fluid Oil Change Pump Oil Tool
Description
Ancel BR2000 Automotive Brake Fluid Bleeder is a brake fluid exchanger equipment. The physical principle is to suck the brake fluid from the new fluid storage tank through a pump, and continuously pump it into the automobile brake fluid container at a specified pressure. Compared with the traditional compressing way to exchange brake fluid, this pulsating brake fluid exchanger can effectively avoid the generation of air bubbles during the filling process, thereby optimizing or avoiding the artificial exhaust process.
Ancel BR2000 Features
1. [One-person Operation&Time Efficient]: Ancel BR2000 Automotive Brake Fluid Bleeder can be operated by one person, four wheels oil can be exchanged together. Four pumps exchange oil simultaneously can save time and labor.
2. [Electric Brake Fluid Exchange]: No need to connect an air compressor. Ancel BR2000 Automotive Brake Fluid Bleeder comes with a built-in working pressure pump. Brake fluid can be exchanged by simply connecting 110V/220V power supply.
3. [Smart adjustment panel design&Pressure Gauge]: One-press fluid exchange. Complete the oil exchange within one minute, conveniently and quickly. Pressure and frequency can be freely adjusted. Equipped with a pressure gauge to observe the fluid exchange pressure value.
4. [Wide range of applicable models]: Come with a variety of adapters. Suitable for European, American, and Asian models.
5. [Three Years Warranty, Lifetime Maintenance]: For damage caused by non-human factors,Ancel promises to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
1. Brake fluid is taken from its container by a pump operating at up to 3.0 bar pressure and is continuously. pumped into the brake fluid reservoir. The individual wheel brake cylinders can then bedrained of their used brake fluid until the new brake fluid comes through.
2. You thus avoid the regular emptying and filling operations, in contrast to conventionalsystems and also. avoid any resulting water absorption in the brake fluid.
3. The pump used to fill the brake fluid reservoir is equipped with pressure monitoring. Should it not be. possible to build pressure or should the pump pull in air, the pump switches itself off automatically.
ANCEL BR2000 EXCHANGING BRAKE FLUID
1. The safety instructions in the section"For your safety"must be strictly observed.
2. Before starting any work, please note the instructions for the vehicle manufacturer for the maximum. filling pressure and any other specific instructions.
3. In general, always follow the recommended instructions and guidelines for bleeding the brake. system as mandated by the manufacturer for each type of vehicle.
4. Factory settings for the pressure regulator are set to 1.6-2.0 bar. This ensuresthat the brake fluid reservoir will not become deformed and that no leaks occur at the secondary cuff. Bleeding or exchanging brake fluid with a lower or higher working pressure can be adjusted using thepressure regulator (Max.3.0 bar).
Operation Steps：
Step 1: Put the suction hose in the brake fluid bottle;
Step 2: Connect the adapter and the oil- drain pipeline;
Step 3: Turn on the equipment and adjust the pressure;
Step 4: Connect the fluid recycling bottle to the brake fluid dispense bump.
Step 5: Check that the adapter is correctly seated and tight where it connects to the brake fluid reservoir. If brake fluid leaks，immediately switch off the brake maintenance device and find the cause.
Step 6: Now bleed the brakes, one-by-one, beginning with the back right brake and finishing with the front left brake. To do this, open the valve on the wheel brake cylinder. Catch the old brake fluid with the collection bottle. As soon as the new, bubble-free brake fluid begins to flow out of the drain hole, the valve can be closed again.
Step 7: Then turn the“ON/OFF”switch OFF, to stop the brake maintenance device working.
Step 8: On the pressure gauge check that the pressure has gone down to 0 bar.
Step 9: Uncouple the depressurized filling hose from the adapter. Remove the adapter from the brake fluid reservoir.
Step 10: The brake fluid reservoir is now full to the rim. Using a pipette, remove enough
brake fluid from the brake fluid reservoir until the permissible fill level has been reached (A).
Step 11: Close the brake fluid reservoir
Parameters:
Voltage: DC 9~15V , AC 90~240V
Maximum power: 25W;
Maximum flow: 1.7 liters/min;
Working pressure: 0.6-3.0 bar;
Oil shortage protection: support;
Filling hose length: 3.5m;
Noise: ≦56dB;
Host size: 260×204×240 mm
Notice:
After completing the bleeding process or exchanging brake fluid, should the operation of the brake or clutch pedal be too long or the pressure behind the operation be to "soft ", repeat depressing the pedal several times, each time applying stronger pressure to the pedal or clutch. lf the situation remains unchanged, the bleeding procedure needs to be carried out again.
Maintenance and Care:
1. Before any work is performed on the brake maintenance device, pull out the main plug.
2. Never clean the brake maintenance device with a high-pressure steam washer.
3. Always keep the brake maintenance device clean. Immediately remove any spilled brake fluid.
FOR YOUR SAFETY
Work performed incorrectly can lead to injury or property damage! PAYMENT DELIVERY DETAILS TERMS OF SALES ABOUT US CONTACT US PAYMENT We accept Credit cards、Debit card、Apple Pay、Google Pay etc.payment. Please contact us if you need to use another method to pay. Payment should be made within 4 days after bidding ends. Otherwise an Unpaid Item case will be opened to you. We are not responsible for buyers’ local taxes. Please include your special requests in eBay note if there is any. We reserve the final right of selling DELIVERY DETAILS Order will be shipped within 1 business day after payment confirmed. We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse. From our US/UK/RU/DE/AU warehouse via USPS or UPS eCommerce shipping,Delivery time varies from 2 to 6 business days. From our China warehouse via DHL or Fedex,Delivery time varies from 5-12 business days. We will ship according to your payment address,Please make sure it is correct and include phone number for delivery. If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any. TERMS OF SALES We can not guarantee that you will be able to access every module or use every piece of cd/dvd software. Compatibility varies due to variations in the cars modlue or availabilty of year it released from original factory. We don't take charge to complete clearance when parcel arrived at your Customs(Because we sold at a low price,good quality,limited profit only),but we will do all what we can to help you get your package. Please do not hesitate to leave us your positive feedback if you are happy with your shopping. if you are just a little satisfied with your purchase, please do not leave us negative or neutral feedback before contacting us. We are not responsible for Buyer's Local Taxs ABOUT US We are eager to be your professional parner of automobile diagnostic tool. We support remote assistance by teamviewer if you have any difficulty in software installation. CONTACT US If you are satisfied with our product or our service, please leave Positive Feedback If you have any question,please feel free to  contact us first before you leave feedback , we will try our best to solve the problem Business time: GMT8( 9:00 am-6:30 pm) monday to saturday Brand ANCEL Manufacturer Part Number ANCEL BR2000 Extractor Brake Changer Type Brake Fluid Bleeder Oil Exchange Machine Warranty 5 Year Product Type Brake Fluid Tester Set or Single Item Set Vehicle Type Passenger Vehicle, Motorcycle, Heavy Duty/Commercial, ATV Advantages 1 One-person Operation&Time Efficient Advantages 2 Electric Brake Fluid Exchange Advantages 3 Smart adjustment panel design&Pressure Gauge Advantages 4 Wide Range of Applicable Models Advantages 5 Five Years Warranty, Lifetime Maintenance Voltage DC 9~15V,AC 90~240V Maximum Power 25W Maximum Flow 1.7 liters/min Working Pressure 0.6-3.0 bar Oil Shortage Protection support Filling Hose Length 3.5m Noise ≦56dB

Returns Accepted for this item if it's within 60 Days