2 Inch 52mm Blue Digital Led Electronic Oil

Product Description: Size:2 inch gauge or 52 mm diameter Power:Professional 12V,IGN MAX 0.3A Sensor Mounting Thread: NPT1 / 8 " Read: 0-120PsiBlack Shell *Digital display with black face and blue LED *Used to measure the oil pressure of automobiles *Measurement range is 0~120PSI *Red warning light *High accuracy and easy operation Product Specifications: Diameter Size 2" (52mm) Input Voltage 12V Input Current 0.3A (max) Unit PSI Measurement range 0~120PSI Warning point 10.5PSI Sensor mounting thread NPT 1/ 8 Oil pressure meter size 5.7 * 5.5cm / 2.2 * 2.2in (diameter * height) Sensor size 4.5 * 7cm / 1.8 * 2.8in (diameter * height) Reads 30Psi for boost Sensor Size "(L)*1.6(W) Color Black Case/Blue Digital Readout You'll Receive 1 Pcs 52mm 120 PSI Digital Blue LED Oil Pressure Gauge 1 Pcs Oil Pressure Sensor 1 Pcs English Manual   How to installation: 1.Gauge May Be Mounted In 2"/52mm Dia holes Or In Auto Gauge Custom Mounted Panels .Secure Gauge With Mounting Clamps Supplied. 2.Drill 3/8" Dia .Holes And Install Rubber Grommets Where Pressure Or Vacuum Line Passes Through Sheet Mental Such As Firewall. 3.Attach Nylon Pressure Line To Fitting On Back Of Gauge Using Adaptor ,Ferrule ,And Compression nut .Route Line Through Grommets To Engine Compartment .Connect Line To Pressure port On Engine By Using 1/8" Adaptor Ferrule And Compression Nut For Turbo And Prossure Gauge Or 1/8" Adaptor And Fitting For Vacuum Gauge. 4.Start Engine And Thoroughly Check Installation For Leaks. Twist In Light Socket Assembly And Connect One Wire(Yellow) To Dash Lighting Circut Or Other 12V Power Source And The Other Wire(Black) To A Good Ground. On Dec-09-21 at 18:38:10 PST, seller added the following information:

Returns Accepted for this item if it's within 60 Days